Sealing wax

Sealing wax is a wax material of a seal which, after melting, quickly hardens (to paper, parchment, ribbons and wire, and other material) forming a bond that is difficult to separate without noticeable tampering. Wax is used to verify something such as a document is unopened, to verify the sender's identity, for example with a signet ring, and as decoration. Sealing wax can be used to take impressions of other seals. Wax was used to seal letters close and later (from about the 16th century) envelopes. (Before sealing wax, the Romans used bitumen for this purpose.)

Contents

Composition

Formulas vary, but there was a major shift after European trade with the Indies opened. In the Middle Ages sealing wax was typically made of beeswax and 'Venice turpentine', a greenish-yellow resinous extract of the European Larch tree. The earliest such wax was uncoloured; later the wax was coloured red with vermilion. From the 16th century it was compounded of various proportions of shellac, turpentine, resin, chalk or plaster, and colouring matter (often vermilion, or red lead), but not necessarily beeswax. The proportion of chalk varied; coarser grades are used to seal wine bottles and fruit preserves, finer grades for documents. In some situations, such as large seals on public documents, beeswax was used. On occasion, sealing wax has historically been perfumed by ambergris, musk and other scents.[1]

By 1866 many colours were available: gold (using mica), blue (using smalt or verditer), black (using lamp black), white (using lead white), yellow (using the mercuric mineral turpeth, also known as Schuetteite[2]), green (using verdigris) and so on. Some users such as the British Crown assigned different colours to different types of documents. Today a range of synthetic colours are available.

Method of application

Sealing wax is available in the form of sticks, sometimes with a wick, or as granules. The stick is melted at one end (but not ignited or blackened), or the granules heated in a spoon, normally using a flame, and then placed where required, usually on the flap of an envelope. While the wax is still soft, the seal (preferably at the same temperature as the wax, for the best impression) should be quickly and firmly pressed into it and released.[1]

Modern use

The modern day has brought sealing wax to a new level of use and application. Traditional sealing wax candles are produced in Canada, France and Scotland, using similar formulae as those in the days of yore.

Since the advent of a postal system, the use of sealing wax has become more for ceremony than security. Modern times have required new styles of wax, allowing for mailing of the seal without damage or removal. These new waxes are flexible for mailing and are referred to as glue-gun sealing wax, faux sealing wax and flexible sealing wax.

See also

References

  1. ^ a b Tomlinson, C., ed. (1866). Tomlinson's Cyclopaedia of Useful Arts. London: Virtue & Co.  Vol II, page 495.
  2. ^ "Schuetteite Mineral Data". Webmineral.com. http://webmineral.com/data/Schuetteite.shtml. Retrieved 2011-07-23.